Car detailing. At your place.

A carefully detailed cabin, with a clean, natural finish.

From $179 AUD · approximately 2 hours at the starting level · interior only.

1. Inspect the cabin and agree the priorities.

1. Remove and clean floor mats; thoroughly vacuum seats, carpets, boot and accessible crevices.

1. Brush and clean dashboard, console, cup holders, vents and door trims with material-appropriate products.

1. Clean fabric or leather seat surfaces using the appropriate method.

1. Wipe accessible door jambs and clean interior glass and mirrors.

1. Finish suitable trims with a natural, non-greasy dressing and carry out a final inspection.

Machine extraction, extensive stain treatment, heavy pet hair, mould and specialist odour treatment are quoted separately. Permanent stains and wear may remain.

Starting price only. Based on a standard-sized vehicle in maintained condition. Vehicle size, staining, sand, pet hair and heavy soiling can substantially increase the price and time required. Send vehicle photos for a tailored quote. We confirm the scope and total price before work starts; extra work requires your approval.

A refreshed interior and a beautifully finished exterior in one service.

From $199 AUD · approximately 2.5 hours at the starting level.

Interior process

1. Inspect the cabin and agree the priorities.
2. Remove and clean floor mats; thoroughly vacuum seats, carpets, boot and accessible crevices.
3. Brush and clean dashboard, console, cup holders, vents and door trims with material-appropriate products.
4. Clean fabric or leather seat surfaces using the appropriate method.
5. Wipe accessible door jambs and clean interior glass and mirrors.
6. Finish suitable trims with a natural, non-greasy dressing and carry out a final inspection.

Machine extraction, extensive stain treatment, heavy pet hair, mould and specialist odour treatment are quoted separately. Permanent stains and wear may remain.

Exterior process

1. Inspect exterior surfaces and wheels.
2. Clean wheel faces, tyres and accessible wheel arches with suitable products.
3. Pre-rinse and pre-wash to loosen dirt, followed by a careful contact wash.
4. Rinse and dry with clean microfibre towels.
5. Clean exterior glass, finish tyres and apply a spray sealant for gloss and water repellency.
6. Check the finished vehicle with you.

Paint correction, clay and iron decontamination, engine bay cleaning and specialist treatments are not included in this wash package.

Starting price only. Based on a standard-sized vehicle in maintained condition. Vehicle size, staining, sand, pet hair and heavy soiling can substantially increase the price and time required. Send vehicle photos for a tailored quote. We confirm the scope and total price before work starts; extra work requires your approval.

Reveal greater gloss, clarity and depth with a paint-safe correction process tailored to your vehicle.

1-Step Polish · from $499 AUD

Allow approximately 3–4 hours. One machine-polishing stage to enhance gloss and reduce light swirls and haze. Ideal for generally well-kept paint needing refinement.

2-Step Paint Correction · from $899 AUD

Allow approximately 5–7 working hours, potentially across two days. A cutting stage to address more noticeable defects, followed by a finishing polish for clarity.

Our process

1. Inspect the paint, assess its condition and take thickness readings where appropriate.

1. Thorough exterior wash including wheels and tyres.

1. Iron and tar removal as required, then mechanical decontamination where necessary.

1. Dry the vehicle, mask sensitive trims and perform a test spot.

1. Carry out the selected one-stage refinement or two-stage cut and finish.

1. Inspect with suitable lighting and remove polishing residue.

1. Apply a protective sealant, finish glass and tyres, and inspect the result with you.

Interior detailing and ceramic coating are not included. Deep scratches, clear-coat damage and defects that cannot safely be corrected may remain. No fixed percentage of defect removal is promised. Suitable shade or a covered workspace is required.

Starting price only. Based on a standard-sized vehicle in maintained condition. Vehicle size, staining, sand, pet hair and heavy soiling can substantially increase the price and time required. Send vehicle photos for a tailored quote. We confirm the scope and total price before work starts; extra work requires your approval.

Our most complete detailing experience: a carefully refreshed cabin, detailed exterior and machine-polished paint.

Ultimate Detail + 1-Step Polish · Interior + Exterior + 1-Step · from $699 AUD

Allow approximately 7–8 working hours. A complete detail paired with 1-Step Polish for greater paint clarity and shine.

Ultimate Detail + 2-Step Paint Correction · Interior + Exterior + 2-Step · from $1,099 AUD

Allow approximately 10–12 working hours, usually across two days. A complete detail paired with a separate cutting and finishing stage.

Interior process

1. Inspect the cabin and agree the priorities.
2. Remove and clean floor mats; thoroughly vacuum seats, carpets, boot and accessible crevices.
3. Brush and clean dashboard, console, cup holders, vents and door trims with material-appropriate products.
4. Clean fabric or leather seat surfaces using the appropriate method.
5. Wipe accessible door jambs and clean interior glass and mirrors.
6. Finish suitable trims with a natural, non-greasy dressing and carry out a final inspection.

Machine extraction, extensive stain treatment, heavy pet hair, mould and specialist odour treatment are quoted separately. Permanent stains and wear may remain.

Exterior preparation & polishing

1. Inspect the paint, assess its condition and take thickness readings where appropriate.
2. Thorough exterior wash including wheels and tyres.
3. Iron and tar removal as required, then mechanical decontamination where necessary.
4. Dry the vehicle, mask sensitive trims and perform a test spot.
5. Carry out a one-step polish, or a cutting stage followed by a finishing polish, according to your selected option.
6. Inspect paint under suitable lighting and remove polishing residue.
7. Apply a protective sealant; finish exterior glass and tyres.
8. Complete a final interior and exterior inspection with you.

Ceramic coating is a separate upgrade. Deep scratches, failed clear coat, permanent stains and wear may remain. Suitable shade or a covered workspace is required for polishing.

Starting price only. Based on a standard-sized vehicle in maintained condition. Vehicle size, staining, sand, pet hair and heavy soiling can substantially increase the price and time required. Send vehicle photos for a tailored quote. We confirm the scope and total price before work starts; extra work requires your approval.